|
Power supply 50W with additional output 12V and 5V/GND (insulated from common GND)
|
|
Uin =95 – 270 VAC (50-60Hz)
|
|
Uout =12V DC or 15V DC (selected by jumper), tol. Uout=<2% or in version with changing resistor version 9V DC or 12V DC (selected by jumper)
|
|
Pomax = max 50W, Eff > 85%
|
|
PFC - not available (not necessary up to 50W)
|
|
U Add. Output = 5V, P = 200 mW – (for insulated DMX In/Out signals interface and for insulated from the Main GND and Earth DMX signal shielding) insulated from the Main Output Uout /GND and from the Uin.
|
|
U Add. Output = 5V, P = 1-2 W – not insulated from the Main Output Uout
|
|
All the Output voltages are isolated from the primary main Uin by > 2000V transformer/optocoupler insulation
|
|
Input/Output Over Current protection
|
|
Output Short –Circuit protection
|
|
Overheating protection (Heat- Sink protection temperature >90 deg. C)
|
|
Additional output over voltage protection (by customer requirements) at U>15V DC
|
|
Dimensions - (for low profile mounting)
|
