POWERFUL LED EMITTERS

Power supply 50W with additional output 12V and 5V/GND (insulated from common GND)



Power supply 50W with additional output 12V and 5V/GND (insulated from common GND)

TECHNICAL SPECIFICATION


Power supply 50W with additional output 12V and 5V/GND (insulated from common GND)

Uin =95 – 270 VAC (50-60Hz)

Uout =12V DC or 15V DC (selected by jumper), tol. Uout=<2% or in version with changing resistor version 9V DC or 12V DC (selected by jumper)

Pomax = max 50W, Eff  > 85%                  

PFC  - not available (not necessary up to 50W)

U Add. Output = 5V, P = 200 mW – (for insulated DMX In/Out signals interface and for insulated from the Main GND and Earth DMX signal shielding) insulated from the Main Output Uout /GND and from the Uin.

U Add. Output = 5V, P = 1-2 W – not insulated from the Main Output Uout

All the Output voltages are isolated from the primary main Uin by > 2000V transformer/optocoupler  insulation

Input/Output Over Current protection

Output Short –Circuit protection

Overheating protection (Heat- Sink protection temperature >90 deg. C)

Additional output over voltage protection (by customer requirements) at U>15V DC

Dimensions - (for low profile mounting)

back to the project