This page is under construction For more information click here


LED emitter 21W/12V DC

LED emitter 21W/12V DC LED emitter 21W/12V DC LED emitter 21W/12V DC

- 107mm 9 LED CREE emitters.
- RGB 9 LED  emitter for working with 9V, 12V, 15V, 18V and 24V DC (from 7v to 28V DC) in PWM driver mode - with high efficiency.
- Used LED – 9pcs. High luminous flux LEDs, 3W each
- Lifespan 50 000h
- LED optics - 9 High precision collimators with different beam angle: very narrow lenses - from 6-7 degree to medium  25 degree or  wide 45-60 degree
- Color range –RGB for a complete range of color shades , saturated and soft.
- Electronic thermal protection at 65 degree Incorporated.
- Power for RGB is around 21W
- Power supply unit – Voltage 220-240 V AC 50/60 Hz
- Output 12V DC
- Control – Also with 3 PWM controlled inputs (from DMX/PWM controller).Standard DMX512 USITT`90 protocol
- Remotely programmable DMX address on every unit via administration software by DMX512
- Beam control – Electronic dimmer control via DMX external control
- The expected connection capability is up to 20 meters and up to 20 LED emitter connected to one master (one pixel RGB PWM controller - DEMO or DMX).
- It is possible to incorporate build-in DEMO PROCESSOR board and as a Master for other.
It is possible also to install small DMX receiver inside each lamp.
- The LEDs can be customized for different size and shapes
- The Power can vary from 10-200W depending on the customers needs.